Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Default Data Output Mode (command 17h)

This command determines the order of data output after the sensor is powered on or the processor is reset. After the power is on or the processor is reset, the program will send data periodically via the interface at the time interval prescribed by the 13h command.

Command format:

Offset, bytes Field size, bytes Value Description
0 1 31h Prefix
+1 1 00h..FFh Network address of the recipient
+2 1 17h Operation code
+3 1 00h No data output
+3 1 01h The data are output in binary form
+3 1 02h The data are output in character-coded form
+4 1 00h..FFh Checksum

Response format:

Offset, bytes Field size, bytes Value Description
0 1 31h Prefix
+1 1 00h..FFh Network address of the recipient
+2 1 17h Operation code
+3 1 00h The command has been executed successfully
+3 1 01h The command cannot be executed
+4 1 00h…FFh Checksum