Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Installation

We recommend that you install an Omnicomm ICON display on a magnetic holder or fasten it with a double-sided adhesive tape. The display may also be installed using self-tapping screws:

 Fixing with self-tapping screws

When identification with RFID card is used, fasten the RFID holder to the display using self-tapping screws. To do this, unscrew the self-tapping screws with a screwdriver PH1 and remove the plate.

 Mounting plate

Fasten the display with the RFID holder on a magnetic holder or a flat surface using a double-sided adhesive tape.

 Крепление держателя RFID

Dismantling the Omnicomm ICON display fastened with a double-sided adhesive tape, use a knife or an equivalent tool and be very careful.