Appendix. List of equipment for Omnicomm LLS-Ex 5 fuel level sensors and BIS-MX Spark protection unit installation
Omnicomm LLS-Ex 5 sensor
| No. | Name | Quantity, pcs |
|---|---|---|
| 1 | Fuel Level Sensor | 1 |
| 2 | Casing-seal | 1 |
| 3 | Assembly parts kit | 1 |
| 4 | Mounting cable | 1 (*In case of warranty replacement, no cable is provided in the supply set.) |
| 5 | Gloves | 1 |
| 6 | Passport | 1 |
Assembly parts kit:
| No. | Name | Quantity, pcs |
|---|---|---|
| 1 | Gasket | 1 |
| 2 | Closed-end M5 rivet nut | 4 |
| 3 | Pin | 2 |
| 4 | Bolt M5 x 20 | 4 |
| 5 | Washer 5.3 mm | 4 |
| 6 | Lock washer 5.1 mm | 1 |
| 7 | Self-tapping roofing screws 4.8 x 29 | 4 |
| 8 | Blade fuse 1A | 1 |
| 9 | Fuse holder | 1 |
| 10 | Coupling sleeve | 4 |
| 11 | Centering retainer wall | 1 |
| 12 | Seal tie | 1 |
BIS-MX Spark protection unit
BIS-MX spark protection unit on voltage regulation tubes:
| No. | Name | Quantity, pcs |
|---|---|---|
| 1 | BIS-MX unit | 1 |
| 2 | BIS-MX cover | 1 |
| 3 | Assembly parts kit | 1 |
| 4 | Passport | 1 |
Assembly parts kit:
| No. | Name | Quantity, pcs |
|---|---|---|
| 1 | Ground cable | 1 |
| 2 | Mounting cable (7m corrugated tube) | 1 |
| 3 | Bolt М4 х 16 DIN 933 | 5 |
| 4 | Flat washer 4.3 mm DIN 125 | 6 |
| 5 | Lock washer 4.1 mm DIN 127 | 6 |
| 6 | Nut М4 DIN 934 | 6 |
| 7 | Fuse 1A | 1 |
| 8 | Fuse holder | 1 |
| 9 | Coupling piece | 4 |
