In the «Administration» section, open the «Rules for video download» tab. A window will open:

Click the «Create» button. A window will open:

«Active» – stop/start checking events.

«Name» – name of the task. The name of the task must be unique.

«Actuated» – select the video to be uploaded based on the event or schedule.

«Vehicles» – - select the vehicle(s). Click on the Select vehicles link. Select one or more groups of vehicles for which tasks will be generated based on the events.

«Event» – select the section, type, and parameter of the event. Possible options:

Events from the «Fuel» section:

• Refueling / draining
  • Start of refueling
  • End of refueling
  • Start of refueling during fuel dispensing
  • End of refueling during fuel dispensing

• Draining
  • Start of draining
  • End of draining
  • Start of draining during fuel dispensing
  • End of draining during fuel dispensing

• Dispensing
  • Start of dispensing
  • End of dispensing

• LLS failure
  • Start of LLS failure
  • End of LLS failure

Events from the «Movement section:

• Standstill
  • End of standstill (based on ignition status)
  • End of standstill (not based on ignition status)
  • Start of standstill (based on ignition status)
  • Start of standstill (not based on ignition status)
  • Change of standstill location

• Exceeding the allowed speed
  • Speed threshold exceeded briefly
  • Start of exceeding the speed threshold

• Entering a geofence
• Leaving a geofence

• Stoppage
  • Start of stoppage (based or not based on ignition status)
  • End of stoppage (based or not based on ignition status)

• Exceeding the acceleration limit
  • Start of exceeding the acceleration limit
  • Acceleration limit exceeded briefly

• Start of exceeding the speed threshold in the geofence
• End of exceeding the speed threshold in the geofence

Events from the «Engine» section:

• Ignition
  • Ignition on
  • Ignition off

• Power
  • Turning on the power supply
  • Turning off the power supply

• Exceeding the allowed RPM value
  • Start of exceeding the limit load on the engine
  • Limit load on the engine exceeded briefly

Events from the «Other» section:

• Service authorization
• iButton presented
• Switching to the main power supply
• Panic button pressed
• Driver sign out
• Switching to the backup power supply
• Driver sign in
• Device tampering

Events from the «Auxiliary equipment» section:

• Auxiliary equipment switched on
  • Auxiliary equipment 1, 2, 3, 4 switched on

• Start of the area of exceeding the allowed value for auxiliary equipment
  • The auxiliary equipment 1, 2, 3, 4 is starting to exceed the limit threshold value
  • The auxiliary equipment 1, 2, 3, 4 briefly exceeded the load limit

• End of the area of exceeding the allowed value for auxiliary equipment
  • The auxiliary equipment 1, 2, 3, 4 is stopping to exceed the limit threshold value

• Auxiliary equipment switched off
  • Auxiliary equipment 1, 2, 3, 4 switched off

Events from the «iQFreeze» section:

• Changing the set-point temperature
• Setting the set-point temperature
• Door opening
• Door closing
• The temperature is outside of the tolerance range
• The temperature is back within the tolerance range
• Switching to increased RPM
• Switching to reduced RPM
• Refrigerator operation error
• Changing the refrigerator operating mode
• Data transfer interruption

Events from the «TPMS» section:

• Pressure drop in the tire
• Pressure rise in the tire
• Pressure restored
• Temperature rise in the tire
• Temperature normalized in the tire
• Sudden loss of pressure
• Possible axis geometry violation
• No data from the Tire Pressure Monitoring System

Events from the «Save driving» section:

• Movement with headlights off
• Movement with unfastened seatbelts
• Exceeding the maximum speed limit
• Exceeding the allowed speed limit
• Short-term exceeding of maximum speed limit
• Short-term exceeding of allowable speed limit
• Positive acceleration threshold exceeding
• Negative acceleration threshold exceeding
• Lateral acceleration threshold exceeding
• Vertical acceleration threshold exceeding
• Allowed turning speed exceeding
• Maximum turning speed exceeding
• Traffic violation. Exceeding the speed limit
• Continuous engine idle operation
• Movement with cold engine
• Movement with overheated engine
• Movement at decreased RPM
• Movement at increased RPM
• No valid GPS data

When selecting to upload videos on a schedule:

“By days of the week” - select the days of the week on which you want to download video files.

“Request video every” - specify the frequency of requests.

“Channels” - select the cameras for which you wish to create a video download task.

“Length of the video file before the event timestamp” - specify the length of the video before the event is recorded.

“Length of the video file after the event timestamp” - specify the length of the video after the event is recorded.

«Maximum video waiting time». Possible options:

• Unlimited – the video downloading task will wait for the execution for an unlimited amount of time
• Limited - specify the time after which the video download task will be automatically canceled