Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Adding a mobile app and setting up statuses

In Omnicomm Online it is possible to send messages to the Omnicomm Connect mobile app.

In the Omnicomm Online window, in the “Administration” section, open the “Vehicles” tab.

Click “Add a mobile app”. A window will open:

Add a mobile app

“Vehicle Name” – enter the name of the vehicle.

“Active” – check the box to use the mobile app.

Press the “Save” button. A window will open:

Data for a mobile app

Save the login details to access the mobile app.

Mobile app profile configuration

In the Omnicomm Online window, in the “Administration” section, open the “Vehicles” tab.

Select the mobile app from the vehicle list and click on “Vehicle Profile”. A window will open:

In the “Virtual vehicle” section:

Virtual vehicle

“Login” – the username used to access the mobile app.

“Password” – to change the password, click on the link Change password.

“Active” – check the box to use the mobile app.

“Data collection period, s” – set the value of survey period for the mobile app.

“Phone number” – аthe number of the phone on which the mobile app is installed.

In the “Vehicle” section:

VH

“Vehicle Name” – the state registration number or name of the vehicle. Example: 10 RU А 123BV. The vehicle name must be unique in Omnicomm Online. The “Vehicle Name” field must not be empty and must not exceed 100 characters.

“Designation” – the vehicle's designation within the organization.

“Brand” – the vehicle's brand.

“Groups”. Click on the Select group for the vehicle hyperlink and select from the list the groups to which the vehicle will belong to.

“Vehicle category” – select the category of the vehicle. Possible options:

  • Categories A, B, C, D, E, F, according to the traffic regulations of the Russian Federation
  • Category SPEC - specialized machinery

In the “Movement” section:

Movement

“Method of calculation of mileage and speed” allows you to choose based on what data and using which method are the mileage and speed calculated. Possible options:

  • “Based on the data from the AVL unit (excluding coordinates drifts)” - Omnicomm Online calculates the mileage according to the data obtained from the Terminals by discarding the drift coordinates.
  • “By data from AVL unit (including coordinates drifts)” - Omnicomm Online calculates the mileage according to the data obtained from the Terminals without excluding drift coordinates.

“Correction coefficient for the speed sensor”

“Maximum permissible speed, km/h”

“Track standstills longer than, min:sec” – check the box and specify the time in minutes after which, when the relevant conditions are met, a vehicle standstill will be recorded.

“Track stoppages longer than, min:sec” – check the box and specify the time in minutes after which, when the relevant conditions are met, a vehicle stoppage will be recorded.

«Take into account the ignition when determining standstills and stoppages» – check the box, when it is necessary to record standstills and stoppages taking into account the ignition status. The choice is available only when the parameters “Track standstills longer than, minutes” or “Track stoppages longer than, minutes” are enabled.

The conditions for recording a standstills/stoppages, taking the vehicle's ignition into account:

  • more time has passed since the ignition was turned off than indicated in “Track standstills longer than, minutes”
  • vehicle speed is less than 2 km/h

The conditions for recording a standstills/stoppages, without taking the vehicle's ignition into account:

  • the vehicle speed is less than 2 km/h for all consecutive events with “raw” data
  • the distance between any events with “raw” data is less than 800 m
  • the time interval between the first and the last event with “raw” data is greater than the value of the parameter “Track standstills longer than, minutes”
  • the time interval between the first and the last event with raw data does not include periods with data absence

«Minimum duration of data absence» – the maximum time between the current and the last event of valid “raw” data, after which Omnicomm will record the event of data absence.

«Drift by mileage and by distance» – specifies the number of cut off drift coordinates when the vehicle is parked, with the GPS module in operation. When a vehicle is moving at a speed of more than 5 km/h, drift coordinates are not cut off.

The values «Drift by mileage, m» (from 0 to 100 m.) and «Drift by distance, m» (from 0 to 100 m.) are selected taking into account the average speed of the vehicle. The default value for both parameters is 20 m.

In the «Statuses» section:

Statuses

«Default statuses» – select this option to use the pre-set statuses.

«Custom statuses» – select this option to create custom user statuses.

To create custom user statuses:

  • «Name» – enter the status name that will be displayed in Omnicomm Online.
  • «Color» – choose the color that will be used to highlight the status in Omnicomm Online.

Add the required amount of statuses using the “Add status” link.