Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Task Creation

Select one or several VH for which it is required to control the maintenance, press the right mouse button and select “Maintenance schedule”:

Maintenance schedule

Press the right mouse button and select “Create new maintenance task”:

Create new maintenance task

“VH” - select a VH, for which it is necessary to add a task for maintenance.

“Maintenance service name” - enter a denomination of technical maintenance.

“Scheduled maintenance” - switch it on if automatic generation of maintenance task is required, with the set intervals between the procedures.

“Maintenance service description” - enter description of works to be performed during maintenance.

“Time” - time of switching on/off control over performance of maintenance by date.

With switched on control over maintenance performance date:

  • “Date of the next maintenance service calculated by time” - select a date for maintenance service performance. Allowed values: from 01/01/2000 to 31/12/2030
  • “Interval” - set a number of days or months between maintenance services for automatic generation of a next maintenance task. It applies to periodic maintenance service only
  • “Remind before” - specify in how many days before the maintenance service date, the notification shall be generated and the maintenance task shall be selected in the list.

For notifications generation it is required to add a notification on event “Maintenance is expected”.

“Mileage” - switching on/off control over performance of maintenance service by mileage. Switching on control over mileage is allowed only with the set initial parameters for control over maintenance service in the VH profile.

With switched on control over VH mileage before the maintenance service:

  • “Date of the next maintenance service calculated by mileage, km” - set the value of the VH mileage upon achieving which its technical maintenance needs to be carried out. Allowed values: from 1 to 10.000.000.
  • “Interval” - set a number of kilometers between maintenance procedures for automatic generation of the next maintenance task. It applies to periodic maintenance service only.
  • “Remind before” - specify in how many kilometers before the mileage value of maintenance service, the notification shall be generated and the maintenance task shall be selected in the list.

For notifications generation it is required to add a notification on event “Maintenance is expected”.

“Engine hours” - time of switching on/off control over performance of maintenance by number of engine hours. Switching on control over engine hours is allowed only with set initial parameters for control over maintenance service in the VH profile.

With switched on control over VH engine hours before the maintenance service:

  • “Date of the next maintenance service calculated by engine hours” - set a number of the VH engine hours upon reaching which the VH technical maintenance needs to be carried out. Allowed values: from 1 to 10. 000.000.
  • “Interval” - set a number of engine hours between maintenance procedures for automatic generation of the next maintenance task. It applies to periodic maintenance service only.
  • “Remind before” - specify in how many engine hours before the achievement of the value of the next maintenance service, the notification shall be generated and the maintenance task shall be selected in the list.

For notifications generation it is required to add a notification on event “Maintenance is expected”.