Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Summary Report

  1. Select a VH
  2. Select a period of time for report generation
  3. Press “Add report” button and select “Summary report”

«Summary report»

Summary report groups by vehicle and by date.

To set up the report, press the right mouse button and select “Report settings”:

Setting up the «Summary report»

The Summary Report is built for one or several vehicles and includes all parameters of the “Statistics” report, except for the parameters calculated for multiple vehicles and listed below:

In the “Movement and operation” section:

Use the mileage meter only during the configuration of “Vehicle profile”/ “Setting the initial values for VH monitoring”/“According to the mileage”:

  • Mileage at the beginning of the period, km - the mileage calculated as the sum of the initial value of the odometer and the distance to the date of the beginning of the period
  • Mileage at the end of the period, km - the mileage calculated as the sum of the initial value of the odometer and the distance to the date of the end of the period

In the “Meter readings (CAN bus data)” section

  • CAN odometer reading at the beginning of the period, km - CAN bus odometer reading at the beginning of the period
  • CAN odometer reading at the end of the period, km - CAN bus odometer reading at the end of the period

The vehicle fuel saving parameters are displayed in accordance with the established standard.