Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Omnicomm Online Release 4.4.6

Release date – January 29th, 2019

NEW FEATURES IN OMNICOMM ONLINE:

1. RFID in Refueler Statement Report

For filling stations/fuel tankers equipped with RFID/iButton readers there appeared a possibility to control fuel dispensing to the vehicles without fuel level sensors installed.

The card number used during the dispensing is shown in the RFID/iButton column. ВWhen the card is assigned to the driver, his data is also reflected in the Assigned column. These functions are useful when fuel is dispensed for light vehicles, buses, etc., where fuel level sensors installation is unreasonable.

Another case is refueling of the rented vehicles that are not equipped with monitoring devices.

New columns of the report:

  • iButton number
  • The card is assigned

Refueler Statement

2. Exzotron in Refueler Statement Report

Filling stations/fuel tankers equipped with fuel dispensing controllers manufactured by Exzotron with a built-in total counter, that duplicates the mechanical total counter, there appeared a possibility in the report to receive data about the volume of the dispensed fuel as an accrued total at the beginning and at the end of the report generating period. Thus, there is one more instrument of task-oriented fuel dispensing control.

Additional reporting indices:

  • Total meter readings at the beginning of the reporting period
  • Total meter readings at the end of the reporting period

3. Safe Driving: Multiplication of the Event Period by Penalty Points

There is a new setting in the Bad Habits section to accrue penalty points with a higher precision.

When a driver commits one or more continuous violations, the system considers the intersection duration of violations committed by all the participants in the Bad Habit.

In Administration section when creating or editing a bad habit, Consider that the Violation Duration parameter should be activated.

Safe driving

4. RFID in the Refueler Statement Report

For filling stations/fuel tankers equipped with RFID/iButton readers there appeared a possibility to control fuel dispensing to the vehicles without fuel level sensors installed.

The card number used during the dispensing is shown in the RFID/iButton column. When the card is assigned to the driver, his/her data is also reflected in the Assigned column. These functions are useful when fuel is dispensed for light vehicles, buses, etc., where fuel level sensors installation is unreasonable.

Another case is refueling of the rented vehicles that are not equipped with monitoring devices.

New columns of the report:

  • iButton number
  • The card is assigned

5. Exzotron in the Refueler Statement Report

Filling stations/fuel tankers equipped with fuel dispensing controllers manufactured by Exzotron with a built-in total counter, that duplicates the mechanical total counter, there appeared a possibility in the report to receive data about the volume of the dispensed fuel as an accrued total at the beginning and at the end of the report generating period. Thus, there is one more instrument of task-oriented fuel dispensing control.

Additional reporting indices:

  • Total meter readings at the beginning of the reporting period
  • Total meter readings at the end of the reporting period

6. iButton 14-digit numbers are supported