Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Omnicomm Configurator

1. Connection the terminal to a PC using USB cable

2. Install and run Omnicomm Configurator. A window will open

 Omnicomm Configurator

3. Select equipment – “Terminal”.

Advanced mode allows you to configure all the equipment parameters available.

List of parameters shown in advanced mode only:

In the “Communication” section:

  • Data collection and transmission blocking
  • EGTS protocol settings
  • Communication Server No. 2, No. 3 connection settings
  • GSM and SMS communication parameters
  • Roaming connection parameters
  • Roaming parameters

In the “RS-485 and RS-232 Interfaces Configuration” section:

  • “CAN-log”
  • “J1708”
  • “NMEA reception”
  • “NMEA transmission”
  • “PP-01”
  • “Camera”
  • “DV-01”
  • “Tachograph VDO”
  • “iQFreeze”
  • “TPMS Pressure Pro”
  • “ALM Weight Indicator”
  • “Carrier Reefer”

In the “Auxiliary equipment” section:

  • Panic button parameters
  • Accelerometer parameters

Sections “Universal inputs”, “CAN”, “Identification”, “Geofences”, “Outputs”, “Driving Control”.