Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Voice Communication Kit

The voice communication kit is installed in the vehicle's cabin.

To mount the microphone holder, remove the protective film from the double-sided tape and press it against the prepared surface.

To mount the speaker, use the bracket and self-tapping screws.

To connect the voice communication kit to the Omnicomm Profi and Profi Wi-Fi terminals:

  • crimp the wires of the Omnicomm Profi terminal with cable lugs using a crimping tool (e.g. HT-864; HT-866; PKVK-10) or pliers and connect as shown in the diagram

Connect the voice communication kit to the Omnicomm Optim terminal using an audio cable as shown in the diagram: