Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


General Configuration Information

Omnicomm Configurator There are two ways to configure Omnicomm Terminals: 1. Via the Omnicomm Configurator upon connecting the Terminal to a personal computer; 2. Via the Remote Configuration Server (RCS).

Initial Terminal's configuration must be performed via Omnicomm Configurator program.

Omnicomm Configurator

1. Connect the Terminal to the personal computer with a USB cable. 2. Install and run the Omnicomm Configurator. You will be taken to the following screen:

3. Select the 'Configuring the Terminal' operation mode.

Remote Configuration Server (RCS)

Open your browser and enter 'http://config.omnicomm.ru:9911/#en' in the URL bar to connect to the configuration server. Then, the window will open.

To add the terminal, do the following:

1. Enter the Terminal's identification number in the 'Terminal ID' field.

2. Enter the password that you selected for the Terminal when configuring it via the Omnicomm Configurator in the 'Password' field.

3. Click on the '+' button.