Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


SMS commands

SMS commands for Terminal configuration

Command Function
Command text in SMS message Reply to SMS command
*CONNECT#CONNECT url_CS:portRequest to establiish connection between the Terminal and the CS
*GETLINK#LINK ip4_url_CS:port date_and_timeEnquiry on state of connection to the CS
*GETINFO#INFO DID=device ID HW=code_hardware_version BL=loader_version FW=wiring_version REC=number_of_archived_records IMEI=unique_identificator_of_GSM_modem Enquiry on the terminal state
*RESET#RESET param
Possible parameter readings:
param = OK (when command is sent)
param = ER (when no command is sent)
Restarting the Terminal
*GETSTAT#STAT Terminal_date_and_time
GPS=GPS coordinates
SPD=speed
IGN=state_of_ignition
L1=fuel_level:sensor_state …
L6=fuel_level:sensor_state
LLS/LLS-AF fuel level sensor state codes:
0 - sensor off;
1 - sensor not ready;
2 - sensor ready, frequency of 20 to max. Hz;
3 - error, frequency of 0 to 19 Hz
Request to check vehicle state
*SETPWDID vid pwdid#
vid is the Terminal's ID, pwdid is password/identificator
SETPWDID ERRID/ERRNulPWD/ERRAlrSet/PWD:pwdid OK Setting the “password” parameter
*CONNECTSC# RESET param
Possible parameter readings:
param = OK (when command is sent)
param = OK (when command is sent)
param = ER (when no command is sent)
Enquiry on establishing connection of the terminal with the configuration server
*SETAPN apn#
apn – operator's APN
SETAPN apn ERR/OK APN installation
*GPSCOLD#GPSCOLD ERR/OKCold start of GPS receiver