Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Latitude

In the “Method of calculation” — select a Method of calculation depending on the type of the connected auxiliary equipment.

Possible Method of calculation options:

GPS data. This Method of calculation is set up if the third-party terminal transmits the latitude from GPS data.

Longitude

In the “Method of calculation” — select a Method of calculation depending on the type of the connected auxiliary equipment.

Possible Method of calculation options:

GPS data. This Method of calculation is set up if the third-party terminal transmits the longitude from GPS data.

Speed

In the “Method of calculation” — select a Method of calculation depending on the type of connected auxiliary equipment.

Possible Method of calculation options:

GPS data. This Method of calculation is set up if the third-party terminal transmits the speed value from GPS data.

Always 0. This Method of calculation is set up if it is not required to control the VH speed, and Omnicomm Online software will record the VH speed value — 0.

Direction

In the “Method of calculation” — select a Method of calculation depending on the type of connected third-party terminal.

Possible Method of calculation options:

GPS data. This Method of calculation is set up if the third-party terminal transmits the direction of VH motion from GPS data.

Always 0. This Method of calculation is set up if it is not required to control the direction of VH motion; Omnicomm Online software will not record the direction of the motion.

Number of Satellites

“Method of calculation” — select a Method of calculation depending on the type of connected third-party terminal.

Possible Method of calculation options:

GPS data. This Method of calculation is set up if the third-party terminal transmits the number of GPS satellites.

Always 12. This Method of calculation is set up if it is not required to control the number of satellites; Omnicomm Online software will record the permanent presence of 12 satellites.

GPS Data Accuracy

In the “Method of calculation” — select a Method of calculation depending on the third-party terminal type.

Possible Method of calculation options:

“GPS accuracy flag”. This Method of calculation is set up if the third-party terminal transmits information about the accuracy of GPS data. Omnicomm Online software will record accurate GPS data when receiving a respective event from the third-party terminal.

The number of visible GPS satellites. This Method of calculation is set up if the third-party terminal transmits the number of GPS satellites. Omnicomm Online software will record accurate GPS data if the number of visible satellites exceeds three.

Coordinates quality. This Method of calculation is set up if the third-party terminal transmits the VH coordinates. Omnicomm Online software will record accurate GPS data when receiving at least two coordinates from the third-party terminal.

Always Accurate Data. This Method of calculation is set up if it is not required to control GPS data; Omnicomm Online software will always record accurate data.

Altitude

In the “Method of calculation” — select the Method of calculation depending on the type of connected third-party terminal.

Possible Method of calculation options:

GPS data. This Method of calculation is set up if the third-party terminal transmits the value of the VH position height by GPS data.

Always 0. This Method of calculation is set up if it is not required to control the height of the VH position;

Omnicomm Online software will not display the direction of the motion.