Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Appendix G. Diagram of Product(s) Connection with an External Device

Figure 36. Connecting one Product to an external device through RS-485 interface.

The GND power supply circuit (white wire) of BIS 20240 should be connected to the vehicle's body or to the battery, using the BR15 galvanic isolation unit.

Figure 37. Connecting one Product to an external device through RS-232 interface of LLS 20230.

The GND power supply circuit (white wire) of BIS 20240 should be connected to the vehicle's body or to the battery, using the BR15 galvanic isolation unit.

Figure 38. Connecting several Products to an external device over RS-485 of LLS 20230.

The GND power supply circuit (white wire) of BIS 20240 should be connected to the vehicle's body or to the battery, using the BR15 galvanic isolation unit.

Note. This connection diagram applies to connection of 2 to 4 Products to one external device.