Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Appendix I. Example of Setting Offset Values and Measurement Range

Initial data:

Fuel tank with the installed Product (Figure 43)

Fuel tank depth: 700 mm

Sensor working length: 680 mm

It is required to set the product in such a way that the fuel level is measured in millimeters with the scale factor of 0.5 mm.

Figure 43

Solution:

Set measurement range value: 1,360;

Offset value: 40.

Therefore, the level value is reduced to millimeters with the scale factor of 0.5mm.