Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Installing BIS 20240 (for LLS 20230)

1) Fix BIS 20240 on selected surface by self-tapping screws or bolts according to installation dimensions (Figure 35, Appendix F).

2) Make an electric connection of BIS 20240 to the vehicle body or to the Ground bus terminal (with earthed element of stationary fuel storage structure) with a copper wire with the cross-section of at least 4 mm2.

The electrical resistance of the conductor between the body of BIS 20240 and the body of the vehicle or Ground bus terminal should not exceed 0.1 Ohm.