Appendix. List of equipment for Omnicomm LLS fuel level sensors installation
| № | Name | Quantity |
|---|---|---|
| 1 | Bimetal core drill ø35 mm | 1 |
| 2 | Core drill shank | 1 |
| 3 | Metal drill ø7 mm or ø4 mm | 1 |
| 4 | Hacksaw | 1 |
| 5 | Spanner 8 mm | 1 |
| 6 | Tap M5 with holder | 1 |
| 7 | Snap-seal for bolt/self-tapping screw | 1 |
| 8 | Personal computer | 1 |
| 9 | Omnicomm Configurator program | 1 |
| 10 | Omnicomm | 1 |
| 11 | DC power supply unit 10–15 V, 0.5 A (only when UNU is used) | 1 |
| 12 | Measuring container | 1 |
| 13 | Fuel | |
| 14 | Calibration container | 1 |
| 15 | Seal-tie | 1 |
