Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Setting Password on Configuration Changing

In the «Settings» tab select the «Auxiliary equipment»section from the list.

In the «Password settings» section:

Omnicomm Configurator Remote configuration server

If you need to use a password to configure the terminal settings, in the field “Ask for password when saving settings” select “Enabled”. Default value — disabled. Press the “Record into device” button. A window will open:

Password change

“New password” and “Confirm new password” – enter a new password that will be used to get access to settings configuration. The password shall contain 8 characters maximum.

Press the “Save” button. A window will open:

Setting password

Press the “Save” button.

Press the “Record into device” button.