Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Remote Configuration Server Operation Setting

Set password on terminal settings modification by either of the following ways:

  • When configuring the terminal using Omnicomm Configurator set password on settings modification that is different from the password set by default. Default password – 0000
  • Send SMS command to change password set by default: *SETPWDID 212009988 12345#

where: 212009988 – terminal ID; 12345 – password to be set. The password shall contain 8 characters maximum and may include any digits and letters.

The previously set password cannot be changed in this way.

After 6 hours, the terminal will be authorized on the Remote Configuration Server and will be available for operation via the Remote Configuration Server.