Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Selection of Ignition Source

In the «Settings» tab select the «Inputs» section from the list.

In the «Ignition key status» section: Omnicomm Configurator Remote configuration server «Data source» – select the data to register ignition on/off.

«Onboard voltage» – the ignition on is registered upon reaching the vehicle network power supply threshold voltage.

«Threshold voltage» value: when this value is reached, the ignition will register as switched on. Ignition off is registered, when the voltage drops to 0,5 V below the threshold. Default value – 13,5 V.