Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Data Transmission to a Communication Server

In the “Settings” tab select the “Connection” section from the list.

In the “Parameters of output for connection” section:

Omnicomm Configurator Remote configurator server

“Interval of sending data to the server” – enter the number of minutes, upon expiration of which the terminal must establish connection with the communication server, while being in the mobile operator's home network. Recommended value – 10 minutes.

In the “Communication parameters of GSM and SMS” section: Omnicomm Configurator Remote configurator server

“SMS” – enable/disable the commands reception via SMS and sending the information messages by the Terminal.

“SMS destination number” – enter the phone number, to which the SMS will be sent with information about the status of the Terminal and the vehicle.

“SMS template language” – select the language of the SMS template. Possible options: Russian, English, Portuguese, Spanish.

“Vehicle Name” – enter the name of the vehicle. The “Vehicle Name” field is mandatory.

In the “Output parameters to communicate in roaming” section: Omnicomm Configurator Remote configurator server

Select the criterion for the terminal connection to the CS: “By time period” or “By packet size”.

“Interval of sending data to the CS” – enter the number of minutes, upon expiration of which the terminal must establish connection with the communication server, while being in roaming. Recommended value – 180 minutes.

“Data packet size to send to CS” – enter the data batch size, upon achieving which the terminal must establish connection with the communication server, while being in roaming. Recommended value – 100 Kb.

In the “Roaming settings” section: Omnicomm Configurator Remote configurator server

“Roaming” – select the option of SIM card using while in roaming. Possible options: “Permitted”, “Forbidden” or “According to the List”.

  • “Permitted” – the terminal will transmit data via available cellular networks
  • “Forbidden” – the terminal will not transmit data, while being in roaming * «В роуминге как дома»
  • “Always in a home network” – the terminal will transmit data as set up for connection to the CS in a home network
  • “According to the List” – the terminal will only transmit data via the cellular networks provided in the list. Enter the MCC and MNC of required cellular networks in the table.

When the terminal is operating in roaming, the data are only transmitted to communication server No. 1. To transmit data to two communication servers, select “Always in a home network”.