Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


PREPARING TERMINALS TO WORK WITH THE REMOTE CONFIGURATION SERVER

Update the firmware version to omnicomm_131.ofw or higher. Set a password in the terminal to change the terminal settings with the help of Omnicomm Configurator while connecting to the PC, or change the default password remotely with the help of the following SMS-command: *SETPWDID 235009988 12345# where 235009988 — terminal ID, 12345 — password to be set in the terminal. It may comprise letters and digits and must contain 8 characters maximum. The default password is a blank line.

Important! It is impossible to change a previously set password with the help of the SMS-command. Within 6 hours after the password is set, the terminal will perform authentication on the remote configuration server and will become available for operation on the remote configuration server.