Open the “Terminal” tab from the Omnicomm Configurator menu and select the “Restarting Terminal” option.
Setting Up Password for Configuring Parameters
If you want to use a password for configuring the Terminal settings, select “Yes” as an answer to the “Ask for password when saving configurations?” field. Password, enter the password that will be used for access to settings configurations. The password must contain at least 8 characters.
Operational Set-up For Remote Configuration Server
You can set up the password for reconfiguring Terminal settings in either of the two ways: - Set up password for reconfiguring Terminal settings in the Omnicomm Configurator that is different from the default password. The default password is just an empty line.
- Send the following SMS command to update the default factory password: *SETPWDID 235009988 12345#“
where '235009988' is the Terminal ID; '12345' is the new password you want to use.
The password must contain at least 8 characters and may include any numbers or letters. However, you cannot update a previously amended password in the same manner. It will take the Terminal 6 hours to authenticate with the Remote Configuration Server and become available for any further operations via the Remote Configuration Server.
Identifying Terminal's SIM Card Number
The Terminal's SIM card telephone number is displayed automatically in the Remote Configuration Server after the second established connection to the server. The SIM card must have outgoing SMS text messages enabled.