Installing a SIM Card
Before installing a SIM card please disable the PIN code request upon start-up. In order to do that, simply insert the SIM card into any cell phone and disable the PIN code request according to the telephone operating specifications.
1. Use a pointed object to press a button on the Terminal's front panel. This will eject a SIM card holder.
2. Remove the SIM card holder from the slot and install the SIM card in it with the contact side up.
3. Install the SIM card holder back into the slot (see the image below).
It is possible to custom-order an option for installing a SIM chip.
Omnicomm Smart Terminal
|Contact number||Signal Name||Designation||Wire Colours Inside Cable|
|1||Ground (negative) for power supply||General (signal)||White|
|5||Line B: RS-485 LLS||B RS-485 LLS||Blue-white|
|6||CAN L||CAN L||Violet-white|
|7||On-board power voltage||Power supply||Red|
|9||Universal input||Input 1||Black|
|11||Line A RS-485 LLS||A RS-485 LLS||Orange-white|
|12||CAN H||CAN H||Violet-orange|
Power supply and Ignition key
The Omnicomm Terminal must be installed inside the vehicle cabin or inside a specially designed electrical equipment box: weather- and precipitation-proofed and fixed on the vehicle. Drill 4 mounting holes, 4 mm in Ø.
Install the Terminal and fix it by using self-tapping screws.